FrostyTech Mk.II Synthetic Thermal Heatsink Test Results Intel Pentium D / Extreme Edition & Quad Core class heatsinks tested at 150W Intel Core 2 Duo / Pentium 4 / Celeron class heatsinks tested at 85W Results based on readings from a 30x30mm copper interface die with 150W and 85W heat loads applied on the LGA775 version of the Mk.II Test Platform. Temperature results listed for each heatsink were calculated by determining the rise over ambient temperatures at time of test. Information on Frostytech's test methodology is available here. Socket 775 compatible CPU heatsinks
manufacturer:	model no.:	fan speed:	150w thermal test* (°c)	85w thermal test (°c)	noise level (dba)
Thermalright	Ultra 120		17.8	10.6	53.7
3Rsystem	Iceage 120	high	18.2	12.1	47.9
Apack	Zerotherm BTF92 OC Ed	high	19.0	11.2	53.6
Zalman	CNPS9700 LED	high	19.0	10.4	56.5
Thermalright	Ultra-90	high	19.6	13.0	56.2
Enzotech	Ultra-X	high	20.0	8.5	59.1
Apack	Zerotherm BTF90		21.8	12.7	52.1
Xigmatek	HDT-S963	high	21.9	13.7	50.2
Akasa	AK-965	high	22.2	13.8	48.1
Apack	Zerotherm BTF80		22.8	13.9	51.9
Cooljag	Falcon 92-AL	high	23.2	14.2	52.1
Rosewill	RCX-Z3	high	23.3	14.0	58.6
Coolink	Silentator	high	23.5	16.4	41.2
Scythe	Mine Rev. B		23.6	15.0	36.8
Cooljag	Falcon 92-Cu	high	23.6	14.8	52.8
Akasa	AK-920	high	24.3	14.1	52.9
Asus	Arctic Square	high	24.9	14.9	44.9
Akasa	AK-922 (EVObue)	high	25.5	15.4	60.3
Coolermaster	Aquagate Mini R80	high	25.7	16.2	59.2
Auras	SLC-747	high	27.9	25.7	52.2
Thermalfly	F1-IACSHA	high	29.0	18.3	60.4
nPowertek	TTIC NPH1000		29.3	16.8	47.5
Thermalfly	I75DUB	high	29.5	16.8	68.5
Zalman	CNPS9500 AT		29.6	17.3	53.3
Alpha Novatech	PRE9060M92P	high	29.9	18.5	51.5
Scythe	Kama Cross		30.0	18.8	40.0
Akasa	AK-961		30.0	18.7	60.7
Rosewill	RCX-Z2-EX	high	30.1	18.7	45.9
nPowertek	NPH-775-1		30.1	18.8	50.1
Sunon	Waturbo		30.6	18.3	57.5
Apack	CF800	high	31.4	20.7	48.4
Thermaltake	Jungle512	high	31.6	20.4	60.8
Coolage	Frozen Orb F0-Z924AL	high	32.0	19.9	48.9
Xigmatek	AIO-S80DP	high	32.4	21.4	55.0
Scythe	Katana II		32.5	18.6	37.9
Rosewill	RCX-Z2		32.6	19.3	59.9
Zalman	CNPS7700-Cu	high	32.9	19.7	50.7
Apack	CF900	high	32.9	20.3	48.3
Evercool	PT02-9232CP		33.3	19.9	63.3
Zalman	CNPS7700-Cu LED	high	33.5	20.6	49.8
Intel	Stock Pentium D	high	33.8	20.7	47.5
nPowerTek	SF775-2	high	34.7	21.1	64.6
Apack	Zerotherm BTF92 OC Ed	low	36.1	20.5	36.8
Akasa	AK-960E		36.1	21.4	56.3
Zalman	CNPS7500-Cu LED	high	36.4	22.9	50.9
Thermalfly	I75DUH		37.8	22.8	48.7
Akasa	AK-975CU	high	38.4	23.0	47.7
Cooljag	OAK-H	high	38.5	22.9	55.7
Cooljag	OAK-H2	high	38.6	24.1	55.6
LS Cable	SHS-T700		38.7	22.8	48.5
Intel	Stock Core 2 Duo		49.2	29.0	36.7
Glacialtech	Igloo 5062 Cu Light		50.6	29.7	45.2
Glacialtech	Igloo 5057 E		58.5	36.1	53.4
Spire	Fourier IV SP607B3-C		63.6	18.7	60.2
Cooljag	OAK-H	low	95.3	54.5	29.5
			150w thermal test (°c)	85w thermal test (°c)	noise level (dba)
*heatsinks are ranked according to the 150w thermal test results column (rise over ambient temp.). low temperatures with low noise levels are considered best. for reference heatsinks with variable-speed fans, only the high speed (12v) fan test result is included in the comparison sheet; more detailed results reside in each specific heatsink review.

intel processors vary in power output between single and multi-core processors, so frostytech tests heatsinks with two thermal loads that represent the upper limit of each cpu family. with a 150w heat load applied by the intel lga775 version of frostytech's synthetic thermal test platform, the Zerotherm BTF92 OC ed. heatsink yields an excellent rise above ambient temperature of 19.0°C, with 53.6dBA noise. The Zerotherm BTF92 OC ed. heatsink was also tested with a 85W heat load, and in that circumstance maintained a low 11.2°C rise over ambient temperature.

Fan speeds were then dialed down from 2300RPM to 1000RPM. This caused temperatures to rise on the 150W synthetic test platform to 36.1°C above ambient, while noise levels fell to 36.8 dBA. On the 85W test, the Zerotherm BTF92 OC ed. heatsink maintained a temperature of 20.5°C over ambient.

Key to a heatsink such as this is good airflow. The fan exhaust should always be directed towards the rear of the computer where case fans and the power supply can aid in the removal of warm air from within the chassis. The widely spaced copper fins offer little resistance to airflow and consequently a slower speed fan meshes nicely with the design.

With an emphasis on copper and widely spaced cooling fins, the Apack Zerotherm BTF92 OC edition heatsink is still a remarkably successful thermal solution. It performed very well on the Intel platform in particular, and is quite good, but eclipsed by many other coolers on the AMD platform.

Related Articles:

For more reviews on the latest heatsinks and cooling solutions, rely on FrostyTech's inventory of 400+ heatsink reviews. Here are a few other articles that you might enjoy as well...

- Glacialtech Igloo 5062 Cu Light Heatsink Review
- Glacialtech Igloo 5057 E Heatsink Review
- Glacialtech Igloo 7311 Silent Athlon64 Heatsink Review
- Glacialtech Igloo 7222 Light Athlon64 Heatsink Review
- Akasa AK-975Cu Intel 2U Heatsink Review
- Coolink Silentator Heatsink Review
- Zalman CNPS7500-Cu LED Low Noise Heatsink Review