FrostyTech Mk.II
Synthetic Thermal Heatsink Test Results
Intel Pentium D / Extreme
Edition & Quad Core class heatsinks tested at 150W
Intel Core
2 Duo / Pentium 4 / Celeron class heatsinks tested at
85W
Results based on readings
from a 30x30mm copper interface die with 150W and 85W heat loads
applied on the LGA775 version of the Mk.II Test Platform.
Temperature results listed for each heatsink were calculated by
determining the rise over ambient temperatures at time of test.
Information on Frostytech's test methodology is available
here. |
 |
| Socket 775
compatible CPU heatsinks | |
| manufacturer: |
model no.: |
fan speed: |
150w
thermal test*
(°c) |
85w
thermal test
(°c) |
noise level (dba) |
|
| Thermalright |
Ultra 120 |
|
17.8 |
10.6 |
53.7 |
| Zalman |
CNPS9700 LED |
high |
19.0 |
10.4 |
56.5 |
| Thermalright |
Ultra-90 |
high |
19.6 |
13.0 |
56.2 |
| Enzotech |
Ultra-X |
high |
20.0 |
8.5 |
59.1 |
| Apack |
Zerotherm BTF90 |
|
21.8 |
12.7 |
52.1 |
| Xigmatek |
HDT-S963 |
high |
21.9 |
13.7 |
50.2 |
| Akasa |
AK-965 |
high |
22.2 |
13.8 |
48.1 |
| Apack |
Zerotherm BTF80 |
|
22.8 |
13.9 |
51.9 |
| Cooljag |
Falcon 92-AL |
high |
23.2 |
14.2 |
52.1 |
| Rosewill |
RCX-Z3 |
high |
23.3 |
14.0 |
58.6 |
| Scythe |
Mine Rev. B |
|
23.6 |
15.0 |
36.8 |
| Cooljag |
Falcon 92-Cu |
high |
23.6 |
14.8 |
52.8 |
| Akasa |
AK-920 |
high |
24.3 |
14.1 |
52.9 |
| Asus |
Arctic Square |
high |
24.9 |
14.9 |
44.9 |
| Akasa |
AK-922 (EVObue) |
high |
25.5 |
15.4 |
60.3 |
| Thermalfly |
F1-IACSHA |
high |
29.0 |
18.3 |
60.4 |
| nPowertek |
TTIC NPH1000 |
|
29.3 |
16.8 |
47.5 |
| Thermalfly |
I75DUB |
high |
29.5 |
16.8 |
68.5 |
| Zalman |
CNPS9500 AT |
|
29.6 |
17.3 |
53.3 |
| Alpha Novatech |
PRE9060M92P |
high |
29.9 |
18.5 |
51.5 |
| Scythe |
Kama Cross |
|
30.0 |
18.8 |
40.0 |
| Akasa |
AK-961 |
|
30.0 |
18.7 |
60.7 |
| Rosewill |
RCX-Z2-EX |
high |
30.1 |
18.7 |
45.9 |
| nPowertek |
NPH-775-1 |
|
30.1 |
18.8 |
50.1 |
| Sunon |
Waturbo |
|
30.6 |
18.3 |
57.5 |
| Apack |
CF800 |
high |
31.4 |
20.7 |
48.4 |
| Thermaltake |
Jungle512 |
high |
31.6 |
20.4 |
60.8 |
| Coolage |
Frozen Orb F0-Z924AL |
high |
32.0 |
19.9 |
48.9 |
| Xigmatek |
AIO-S80DP |
high |
32.4 |
21.4 |
55.0 |
| Scythe |
Katana II |
|
32.5 |
18.6 |
37.9 |
| Rosewill |
RCX-Z2 |
|
32.6 |
19.3 |
59.9 |
| Zalman |
CNPS7700-Cu |
high |
32.9 |
19.7 |
50.7 |
| Apack |
CF900 |
high |
32.9 |
20.3 |
48.3 |
| Evercool |
PT02-9232CP |
|
33.3 |
19.9 |
63.3 |
| Zalman |
CNPS7700-Cu LED |
high |
33.5 |
20.6 |
49.8 |
| Intel |
Stock Pentium D |
high |
33.8 |
20.7 |
47.5 |
| nPowerTek |
SF775-2 |
high |
34.7 |
21.1 |
64.6 |
| Akasa |
AK-960E |
|
36.1 |
21.4 |
56.3 |
| Thermalfly |
I75DUH |
|
37.8 |
22.8 |
48.7 |
| Cooljag |
OAK-H |
high |
38.5 |
22.9 |
55.7 |
| Cooljag |
OAK-H2 |
high |
38.6 |
24.1 |
55.6 |
| LS Cable |
SHS-T700 |
|
38.7 |
22.8 |
48.5 |
| Intel |
Stock Core 2 Duo |
|
49.2 |
29.0 |
36.7 |
| Spire |
Fourier IV SP607B3-C |
|
63.6 |
18.7 |
60.2 |
| Cooljag |
OAK-H |
low |
95.3 |
54.5 |
29.5 |
|
|
|
150w
thermal test
(°c) |
85w
thermal test
(°c) |
noise level (dba) |
| *heatsinks are ranked according to
the 150w thermal test results column (rise over ambient temp.). low
temperatures with low noise levels are considered best. for reference
heatsinks with variable-speed fans, only the high speed (12v) fan test
result is included in the comparison sheet; more detailed results reside
in each specific heatsink review. |
The heat output from Intel processors varies widely
between single and multi-core processors, so Frostytech tests heatsinks with
thermal values that represent the upper limits of both existing CPU families.
With a 150W heat load applied by the Intel LGA775 version of
FrostyTech's synthetic thermal test platform, the NPH-1000 heatsink yielded
a rise above ambient temperature of 29.3°C (47.5dBA) at the fans' stock
speed.
Next, the NPH-1000 heatsink was tested
with an 85W heat load; akin to a Core 2 Duo processor. With a lower degree of
heat for the NPH-1000 to disperse to the surrounding environment, the cooler was
able to keep up with a nice result of 16.8°C over
ambient.
On both AMD and Intel test
platforms the nPowertek
NPH-1000 heatsink handled itself well, placing about middle of the pack. On the
AMD front at least, the NPH-1000 heatsink outperforms the NPH-Big K8 model.
However, in both situations there are a handful of other heatsinks which are
able to perform cooler, with less noise output.
Related Articles:
For more reviews on the latest heatsinks and cooling solutions, rely on
FrostyTech's inventory of 400+ heatsink reviews. Here are a few other articles that you might enjoy as well...- Thermalright Ultra-90 Low Noise Heatsink Review
- Asus Arctic Square Heatsink Review
- Xigmatek HDT-S963 Exposed Heatpipe Base Heatsink Review
- Cooljag Falcon 92-Al Heatsink Review
- Intel Stock Core 2 Duo Radial Curved Bifurcated Fin Heatsink Review
- Scythe Kama Cross SCKC-1000 Heatsink
- Evercool Buffalo HPFA-10025 AMD Heatsink Review
- Scythe Mine Rev.B SCMN-1100 Heatsink Review
- Akasa AK-876 AMD Athlon64 Heatsink Review
- Scythe Katana II SCKTN-2000 Heatsink Review
- Akasa Evo Blue AK-922 Heatsink Review
- Coolage Freezer Orb F0-Z924AL Intel Heatsink Review
