FrostyTech Mk.II
Synthetic Thermal Heatsink Test Results
Intel Pentium D / Extreme
Edition & Quad Core class heatsinks tested at 150W Intel Core
2 Duo / Pentium 4 / Celeron class heatsinks tested at
85W Results based on readings
from a 30x30mm copper interface die with 150W and 85W heat loads
applied on the LGA775 version of the Mk.II Test Platform.
Temperature results listed for each heatsink were calculated by
determining the rise over ambient temperatures at time of test.
Information on Frostytech's test methodology is available
here. |
|
Socket 775
compatible CPU heatsinks | |
manufacturer: |
model no.: |
fan speed: |
150w thermal test*
(°c) |
85w thermal test
(°c) |
noise level (dba) |
|
Thermalright |
Ultra 120 |
|
17.8 |
10.6 |
53.7 |
Zalman |
CNPS9700 LED |
high |
19.0 |
10.4 |
56.5 |
Thermalright |
Ultra-90 |
high |
19.6 |
13.0 |
56.2 |
Enzotech |
Ultra-X |
high |
20.0 |
8.5 |
59.1 |
Apack |
Zerotherm BTF90 |
|
21.8 |
12.7 |
52.1 |
Xigmatek |
HDT-S963 |
high |
21.9 |
13.7 |
50.2 |
Apack |
Zerotherm BTF80 |
|
22.8 |
13.9 |
51.9 |
Cooljag |
Falcon 92-AL |
high |
23.2 |
14.2 |
52.1 |
Rosewill |
RCX-Z3 |
high |
23.3 |
14.0 |
58.6 |
Scythe |
Mine Rev. B |
|
23.6 |
15.0 |
36.8 |
Cooljag |
Falcon 92-Cu |
high |
23.6 |
14.8 |
52.8 |
Akasa |
AK-920 |
high |
24.3 |
14.1 |
52.9 |
Asus |
Arctic Square |
high |
24.9 |
14.9 |
44.9 |
Akasa |
AK-922 (EVObue) |
high |
25.5 |
15.4 |
60.3 |
Thermalfly |
F1-IACSHA |
high |
29.0 |
18.3 |
60.4 |
Thermalfly |
I75DUB |
high |
29.5 |
16.8 |
68.5 |
Zalman |
CNPS9500 AT |
|
29.6 |
17.3 |
53.3 |
Alpha Novatech |
PRE9060M92P |
high |
29.9 |
18.5 |
51.5 |
Scythe |
Kama Cross |
|
30.0 |
18.8 |
40.0 |
Akasa |
AK-961 |
|
30.0 |
18.7 |
60.7 |
Rosewill |
RCX-Z2-EX |
high |
30.1 |
18.7 |
45.9 |
nPowertek |
NPH-775-1 |
|
30.1 |
18.8 |
50.1 |
Sunon |
Waturbo |
|
30.6 |
18.3 |
57.5 |
Apack |
CF800 |
high |
31.4 |
20.7 |
48.4 |
Thermaltake |
Jungle512 |
high |
31.6 |
20.4 |
60.8 |
Coolage |
Frozen Orb F0-Z924AL |
high |
32.0 |
19.9 |
48.9 |
Xigmatek |
AIO-S80DP |
high |
32.4 |
21.4 |
55.0 |
Scythe |
Katana II |
|
32.5 |
18.6 |
37.9 |
Rosewill |
RCX-Z2 |
|
32.6 |
19.3 |
59.9 |
Zalman |
CNPS7700-Cu |
high |
32.9 |
19.7 |
50.7 |
Apack |
CF900 |
high |
32.9 |
20.3 |
48.3 |
Evercool |
PT02-9232CP |
|
33.3 |
19.9 |
63.3 |
Zalman |
CNPS7700-Cu LED |
high |
33.5 |
20.6 |
49.8 |
Intel |
Stock Pentium D |
high |
33.8 |
20.7 |
47.5 |
nPowerTek |
SF775-2 |
high |
34.7 |
21.1 |
64.6 |
Akasa |
AK-960E |
|
36.1 |
21.4 |
56.3 |
Thermalfly |
I75DUH |
|
37.8 |
22.8 |
48.7 |
Cooljag |
OAK-H |
high |
38.5 |
22.9 |
55.7 |
Cooljag |
OAK-H2 |
high |
38.6 |
24.1 |
55.6 |
LS Cable |
SHS-T700 |
|
38.7 |
22.8 |
48.5 |
Intel |
Stock Core 2 Duo |
|
49.2 |
29.0 |
36.7 |
Spire |
Fourier IV SP607B3-C |
|
63.6 |
18.7 |
60.2 |
Cooljag |
OAK-H |
low |
95.3 |
54.5 |
29.5 |
|
|
|
150w thermal test
(°c) |
85w thermal test
(°c) |
noise level (dba) |
*heatsinks are ranked according to
the 150w thermal test results column (rise over ambient temp.). low
temperatures with low noise levels are considered best. for reference
heatsinks with variable-speed fans, only the high speed (12v) fan test
result is included in the comparison sheet; more detailed results reside
in each specific heatsink review. |
intel processors vary widely in heat output
between single and multi-core processors, so frostytech relies on two thermal loads that
represent the upper limit of both cpu families to test each heatsink. with a 150w
heat load applied by the intel lga775
version of frostytech's synthetic thermal test platform, the Scythe Kama Cross (SCKC-1000) heatsink maintains a temperature of 30.0°C over ambient (with 40.0 dBA
noise).
As far as Intel heatsinks go, this is a
good result that places the Kama Cross at about the middle of the Intel heatsink
reference list. In comparison, the Scythe Mine Rev. B heatsink runs about 6°C
cooler.
The Kama Cross heatsink was next
tested with an 85W heat load, and in this situation it held steady at
18.8°C over ambient temperatures. The fan speed was maintained at 1500RPM, so noise levels
didn't fluctuate from 40.0 dBA.
Ultimately, the Scythe Kama Cross heatsink is a great low noise cooling option
that places at the middle of Frostytech's heatsink reference list when it
comes to temperatures. The nice 100mm fan holds steady with whisper quiet
operation (40 dBA), but that doesn't allow the Kama Cross
from overtaking other Scythe heatsinks like the Mine Rev.B cooler. In the
end, that makes the Kama Cross is a good low noise, but average heatsink
for Intel and AMD processor platforms.
Related Articles:
For more
reviews on the latest heatsinks and cooling solutions, rely on
FrostyTech's inventory of 400+ heatsink reviews. Here
are a few other articles that you might enjoy as well...
- Thermalright Ultra-90 Low Noise Heatsink Review
- Asus Arctic Square Heatsink Review
- Xigmatek HDT-S963 Exposed Heatpipe Base Heatsink Review
- Cooljag Falcon 92-Al Heatsink Review
- Intel Stock Core 2 Duo Radial Curved Bifurcated Fin Heatsink Review
- Arctic Cooling Freezer 64 LP Heatsink Review
- Evercool Buffalo HPFA-10025 AMD Heatsink Review
- Scythe Mine Rev.B SCMN-1100 Heatsink Review
- Akasa AK-876 AMD Athlon64 Heatsink Review
- Scythe Katana II SCKTN-2000 Heatsink Review
- Akasa Evo Blue AK-922 Heatsink Review
- Coolage Freezer Orb F0-Z924AL Intel Heatsink Review