FrostyTech Mk.II
Synthetic Thermal Heatsink Test Results
Intel Pentium D / Extreme
Edition & Quad Core class heatsinks tested at 150W Intel Core
2 Duo / Pentium 4 / Celeron class heatsinks tested at
85W Results based on readings
from a 30x30mm copper interface die with 150W and 85W heat loads
applied on the LGA775 version of the Mk.II Test Platform.
Temperature results listed for each heatsink were calculated by
determining the rise over ambient temperatures at time of test.
Information on Frostytech's test methodology is available
here. |
 |
Socket 775
compatible CPU heatsinks | |
manufacturer: |
model no.: |
fan speed: |
150w thermal test*
(°c) |
85w thermal test
(°c) |
noise level (dba) |
|
Thermalright |
Ultra 120 |
|
17.8 |
10.6 |
53.7 |
Zalman |
CNPS9700 LED |
high |
19.0 |
10.4 |
56.5 |
Thermalright |
Ultra-90 |
high |
19.6 |
13.0 |
56.2 |
Enzotech |
Ultra-X |
high |
20.0 |
8.5 |
59.1 |
Apack |
Zerotherm BTF90 |
|
21.8 |
12.7 |
52.1 |
Xigmatek |
HDT-S963 |
high |
21.9 |
13.7 |
50.2 |
Apack |
Zerotherm BTF80 |
|
22.8 |
13.9 |
51.9 |
Cooljag |
Falcon 92-AL |
high |
23.2 |
14.2 |
52.1 |
Rosewill |
RCX-Z3 |
high |
23.3 |
14.0 |
58.6 |
Scythe |
Mine Rev. B |
|
23.6 |
15.0 |
36.8 |
Cooljag |
Falcon 92-Cu |
high |
23.6 |
14.8 |
52.8 |
Akasa |
AK-920 |
high |
24.3 |
14.1 |
52.9 |
Asus |
Arctic Square |
high |
24.9 |
14.9 |
44.9 |
Akasa |
AK-922 (EVObue) |
high |
25.5 |
15.4 |
60.3 |
Thermalfly |
F1-IACSHA |
high |
29.0 |
18.3 |
60.4 |
Thermalfly |
I75DUB |
high |
29.5 |
16.8 |
68.5 |
Zalman |
CNPS9500 AT |
|
29.6 |
17.3 |
53.3 |
Alpha Novatech |
PRE9060M92P |
high |
29.9 |
18.5 |
51.5 |
Scythe |
Kama Cross |
|
30.0 |
18.8 |
40.0 |
Akasa |
AK-961 |
|
30.0 |
18.7 |
60.7 |
Rosewill |
RCX-Z2-EX |
high |
30.1 |
18.7 |
45.9 |
nPowertek |
NPH-775-1 |
|
30.1 |
18.8 |
50.1 |
Sunon |
Waturbo |
|
30.6 |
18.3 |
57.5 |
Apack |
CF800 |
high |
31.4 |
20.7 |
48.4 |
Thermaltake |
Jungle512 |
high |
31.6 |
20.4 |
60.8 |
Coolage |
Frozen Orb F0-Z924AL |
high |
32.0 |
19.9 |
48.9 |
Xigmatek |
AIO-S80DP |
high |
32.4 |
21.4 |
55.0 |
Scythe |
Katana II |
|
32.5 |
18.6 |
37.9 |
Rosewill |
RCX-Z2 |
|
32.6 |
19.3 |
59.9 |
Zalman |
CNPS7700-Cu |
high |
32.9 |
19.7 |
50.7 |
Apack |
CF900 |
high |
32.9 |
20.3 |
48.3 |
Evercool |
PT02-9232CP |
|
33.3 |
19.9 |
63.3 |
Zalman |
CNPS7700-Cu LED |
high |
33.5 |
20.6 |
49.8 |
Intel |
Stock Pentium D |
high |
33.8 |
20.7 |
47.5 |
nPowerTek |
SF775-2 |
high |
34.7 |
21.1 |
64.6 |
Akasa |
AK-960E |
|
36.1 |
21.4 |
56.3 |
Thermalfly |
I75DUH |
|
37.8 |
22.8 |
48.7 |
Cooljag |
OAK-H |
high |
38.5 |
22.9 |
55.7 |
Cooljag |
OAK-H2 |
high |
38.6 |
24.1 |
55.6 |
LS Cable |
SHS-T700 |
|
38.7 |
22.8 |
48.5 |
Coolage |
Frozen Orb F0-Z924AL |
low |
41.6 |
25.5 |
34.1 |
Intel |
Stock Core 2 Duo |
|
49.2 |
29.0 |
36.7 |
Spire |
Fourier IV SP607B3-C |
|
63.6 |
18.7 |
60.2 |
Cooljag |
OAK-H |
low |
95.3 |
54.5 |
29.5 |
|
|
|
150w thermal test
(°c) |
85w thermal test
(°c) |
noise level (dba) |
*heatsinks are ranked according to
the 150w thermal test results column (rise over ambient temp.). low
temperatures with low noise levels are considered best. for reference
heatsinks with variable-speed fans, only the high speed (12v) fan test
result is included in the comparison sheet; more detailed results reside
in each specific heatsink review. |
the heat
output from intel processors varies widely between single and multi-core
processors, so frostytech tests heatsinks with two thermal values that represent
the upper limits of both existing cpu families; 150w and 85w. with a
150w heat load applied by the intel lga775 version of frostytech's synthetic
thermal test platform, the Coolage Freezer Orb heatsink yields a rise above ambient temperature of 32.0°C. At the fan's stock speed of 2800RPM this generates 48.9dBA noise. The CPU equivalent of this
test would be an Intel Core 2 Quad, Pentium D/Extreme Edition class processor.
The speed of the 95mm PWM fan
is reduced, the Coolage Freezer Orb maintains a temp of 41.6°C over ambient. Noise levels fall to
a very quiet 34.1dBA. When faced with a high heat load and the
fan in ultra quiet mode, the Freezer Orb FO-Z924AL heatsink is a little underwhelming
to be frank. At full speed, the temperature result is fairly
average.
Next, the Coolage Freezer
Orb heatsink was tested with an 85W heat load; akin to a Core 2
Duo processor. The heatsink achieved a 19.9°C over ambient temperature at default fan speed,
and 25.5°C at reduced fan speed. In this case the
Coolage Freezer Orb is a little better suited, posting thermal results we would class as
good-to-average.
The Coolage Freezer Orb F0-Z924AL
heatsink is perhaps most hampered by its compact size, this limits it in comparison to the tower heatsinks that dominate Frostytech reference list above. Ultimately, Coolage's
Freezer Orb heatsink proves itself to be an average-to-satisfactory heatsink. It will get
the job done at full fan speed without excessive noise, but if your computer case
can accommodate a slightly larger heatsink you can achieve much
better results.
Related
Articles:
For more reviews on the latest heatsinks and
cooling solutions, rely on FrostyTech's inventory of 350+ heatsink reviews. Here are a
few other articles that you might enjoy as well...
- Thermalright Ultra-90 Low Noise Heatsink Review
- Asus Arctic Square Heatsink Review
- Xigmatek HDT-S963 Exposed Heatpipe Base Heatsink Review
- Cooljag Falcon 92-Al Heatsink Review
- Intel Stock Core 2 Duo Radial Curved Bifurcated Fin Heatsink Review
- Arctic Cooling Freezer 64 LP Heatsink Review
- Evercool Buffalo HPFA-10025 AMD Heatsink Review
- Scythe Mine Rev.B SCMN-1100 Heatsink Review
- Alpha Novatech
PRE9060M92P Socket 775 Core 2 Duo Heatsink Review
- Scythe Katana II SCKTN-2000 Heatsink Review
- Akasa Evo Blue AK-922 Heatsink Review
- Rosewill RCX-Z3 Heatsink Review