Acoustic Samples: Listen to this Heatsink!

With the fan on the AVC Z7U7414001 heatsink spinning at approximately 3800 revolutions per minute, noise levels are pretty moderate. However if the conditions are met for full speed operation (5400RPM), the fan can become rather loud. To listen to this heatsink in operation, be sure to click on the little headphones icon below and play the sample MP3 file.

frostytech acoustic sampling chamber - full speed
	standard waveform view of a 10 second recording. click on the headphones icon to listen to an mp3 recording of this heatsink in operation. the fan is rotating at 5400 rpm

frostytech acoustic sampling chamber - low speed
	standard waveform view of a 10 second recording. click on the headphones icon to listen to an mp3 recording of this heatsink in operation. the fan is rotating at 3800 rpm

Sound Level Measurements: Which Heatsink is Quietest?

Listening to the actual noise a heatsink makes allows you to hear what pure numbers alone cannot get across. To further emphasize FrostyTech's reliance on cold hard facts when evaluating a heatsink, we also take noise level measurements with a sound level meter.

FrostyTech.com Heatsink Noise Level Measurements Noise level Decibel measurements of each heatsinks' fan in operation are taken with the aid of a sound level meter and sound isolating enclosure. The values may be higher than the mfgr's listed specs, but are directly comparable to one another. Measurements are made on the dB (A) scale. Information on Frostytech's test methodology is available here.
manufacturer:	model no.:	*fan speed:	noise level (dba):
Arctic Cooling	Silencer 64 Ultra TC	low	27.6 dB	Quiet
Verax	Quattro 1		30.9 dB
Zalman	CNPS9500 AM2	low	36.0 dB
Gigabyte	NeonCooler 8-BL		42.0 dB
Coolermaster	Hyper48		43.6 dB
Arctic Cooling	Alpine64		43.9 dB
Dynatron	A22		44.5 dB
Zalman	CNPS7000B-CU	high	44.9 dB
Zalman	CNPS7000A-Cu	high	45.2 dB
Zalman	CNPS7000-Cu	high	45.2 dB
Noctua	NH-U12		45.4 dB
Ajigo	MF043-044		45.4 dB
Spire	SP741B3		45.6 dB
Scythe	Shogun	high	45.9 dB
Scythe	Kama SCKK1000		47.5 dB
AVC	Z7U7414001	low	48.1 dB
Spire	SP601B3		48.9 dB
Thermaltake	Silentboost K8		49.7 dB
Zalman	CNPS9500LED (clip parallel)	high	50.3 dB
Gigabyte	3D-Rocket		50.7 dB
Arctic Cooling	Freezer 64 Pro		50.9 dB
Evercool	K802-715		51.5 dB
Scythe	Samurai SCSM1000	high	51.6 dB
nPowertek	NPH K8-1		52.2 dB
Zalman	CNPS9500 AM2	high	53.2 dB
Jetart	JAX801		53.5 dB
Coolermaster	Hyper6	high	54.7 dB
Arctic Cooling	Silencer 64 Ultra TC	high	55.5 dB
Evercool	Magic Cooler		55.5 dB
Dynatron	SK-V24		56.4 dB
Gigabyte	3D Rocket-Pro	high	56.7 dB
Vantec	Mach1	high	56.9 dB
EKL	V8	high	57.5 dB
Noctua	NH-U9		58.4 dB
Alpha	PAL-8150		58.9 dB
Coolermaster	Aquagate Mini	high	59.2 dB
AVC	Z7U3301001	high	59.9 dB
Ajigo	MF064-074	high	60.3 dB
Cooljag	SFO-H	high	60.6 dB
Gigabyte	3D Cooler-Pro	high	62.5 dB
Gigabyte	3D Cooler-Ultra	high	63.0 dB
AVC	Z7U7414001	high	63.0 dB
Titan	TTC-K8ATB/825/SC		63.1 dB
CoolJag	SFO-D(18SC)		64.0 dB
ASUS	Starice	high	67.4 dB
Thermaltake	Polo 735	high	68.0 dB
Thermaltake	Venus 12	high	68.1 dB
Gigabyte	G-Power Pro	high	71.9 dB	Loud
			noise level (dba)
*unless noted, for reference heatsinks with variable-speed fans only the 'high speed' (12V) fan noise measurement is included in the comparison sheet; more detailed results for the low fan speed (~5V) tests reside in each specific heatsink review.

The AVC Z7U7414001's 70mm fan becomes very loud (63.0 dBA) when temperatures rise and fan speed increases to the full 5400RPM. At its lower fan speed, 3800RPM, noise levels hover around the 48 dBA mark. Since this is one of AMD's socket AM2 reference heatsinks, the sound level results can be looked at as the benchmarks for comparing other heatsinks against.

Surface Finish and Flatness

Surface finish is an important factor that we all look for when holding a new heatsink. Flipping a cooler over to see how well the base has been machined is a quick way to judge the attention to detail that was put into making it. The following test involves the use of a Surface Roughness Comparator, which offers a concise cross section common machine surface finishes.

The AVC Z7U7414001 heatsink has a surface roughness of approximately ~16 microinches, which is considered satisfactory. Next, let's see how this heatsink handles the heat compared to a selection of other heatsinks!