The fan used here is made by PowerLogic and is pretty quiet, but not low noise. Chances are that a standard case powersupply will drown out the noise however. To hear this heatsink for yourself, click on the little headphones below and download the MP3 file of the cooler in operation.

FrostyTech Acoustic Sampling Chamber
Standard Waveform view of a 10 second recording. Click on the headphones to listen to an MP3 recording of this heatsink in operation.

Sound Level Measurements:

Listening to the actual noise a heatsink makes allows you to hear what pure numbers alone cannot get across. To further emphasize FrostyTech's reliance on cold hard facts when evaluating a heatsink, we also take Decibel readings with a sound level meter. These results may be higher than the manufacturer's listed specs, but then again these are real world measurements.

FrostyTech Sound Level Results
-	Manufacturer	Model	Noise Level	Scale
	Zalman	CNPS6500-AlCu	47.4/28.9 dB	quiet
	Intel	Socket 478	42.5 dB
	Cho-Liang	CL-CB0094-1A	49.8 dB
	Cho-Liang	CL-CB00881	50.2 dB
	Taisol	CEP426151A	50.7 dB
	ChoLiang	CB0307Z17	52.9 dB
	Dynatron	DC1207BMW	53.0 dB
	Swiftech	MCX4000	53.6 dB
	Dynatron	DC1206BMV	55.1 dB
	ChoLiang	CB0309Z17	55.7 dB
	AVC	117140	56.1 dB
	NengTyi	NW6700	58.0 dB
	Coolermaster	IHC-H71	64.4 dB	louder

The Omega HHSL1 sound meter measured a sound level of about 53 dB with this heatsink and that is pretty decent. While anything under the 50dB range is really good, 53dB is still pretty tolerable. It's when you get into the 60+dB range that heatsinks can really drive you insane with noise!