The 120mm PWM fan spins at 2200-800RPM and draws power from a standard 4-pin PWM motherboard fan header. It is backwards compatible with 3-pin connectors. Four 6mm diameter copper heatpipes extend from the base up to the top of the 160mm tall Venti heatsink. Each aluminum fin measures 0.3mm thick and fins are spaced 2.0mm apart.

The Evercool Venti heatsink stands 160mm tall, the tower is 43mm wide without a fan and the first fin is elevated 46mm above the CPU socket. Heat pipes are spaced 7.5mm on center at the base and rise up through the fin stack roughly 48mm and 93mm apart. The base incorporates a 14mm thick aluminum section to provide support for clamping.

The usable area of the Evercool Venti's base measures 40x48mm in size. Looking from the top down we see the novel shape of the aluminum fins which forms a small plenum directly behind the fan motor. Heatpipes are positioned in the path of highest airflow and held in place with wire fan clips.