FrostyTech Mk.II Synthetic Thermal Heatsink Test Results Intel Pentium D / Extreme Edition & Quad Core class heatsinks tested at 150W Intel Core 2 Duo / Pentium 4 / Celeron class heatsinks tested at 85W Results based on readings from a 30x30mm copper interface die with 150W and 85W heat loads applied on the LGA775 version of the Mk.II Test Platform. Temperature results listed for each heatsink were calculated by determining the rise over ambient temperatures at time of test. Information on Frostytech's test methodology is available here. Socket 775 compatible CPU heatsinks
manufacturer:	model no.:	fan speed:	150w thermal test* (°c)	85w thermal test (°c)	noise level (dba)
Thermalright	Ultra 120		17.8	10.6	53.7
3Rsystem	Iceage 120	high	18.2	12.1	47.9
Zalman	CNPS9700 LED	high	19.0	10.4	56.5
Thermalright	Ultra-90	high	19.6	13.0	56.2
Enzotech	Ultra-X	high	20.0	8.5	59.1
Apack	Zerotherm BTF90		21.8	12.7	52.1
Xigmatek	HDT-S963	high	21.9	13.7	50.2
Akasa	AK-965	high	22.2	13.8	48.1
Apack	Zerotherm BTF80		22.8	13.9	51.9
Cooljag	Falcon 92-AL	high	23.2	14.2	52.1
Rosewill	RCX-Z3	high	23.3	14.0	58.6
Scythe	Mine Rev. B		23.6	15.0	36.8
Cooljag	Falcon 92-Cu	high	23.6	14.8	52.8
Akasa	AK-920	high	24.3	14.1	52.9
Asus	Arctic Square	high	24.9	14.9	44.9
Akasa	AK-922 (EVObue)	high	25.5	15.4	60.3
Thermalfly	F1-IACSHA	high	29.0	18.3	60.4
nPowertek	TTIC NPH1000		29.3	16.8	47.5
Thermalfly	I75DUB	high	29.5	16.8	68.5
Zalman	CNPS9500 AT		29.6	17.3	53.3
Alpha Novatech	PRE9060M92P	high	29.9	18.5	51.5
Scythe	Kama Cross		30.0	18.8	40.0
Akasa	AK-961		30.0	18.7	60.7
Rosewill	RCX-Z2-EX	high	30.1	18.7	45.9
nPowertek	NPH-775-1		30.1	18.8	50.1
Sunon	Waturbo		30.6	18.3	57.5
Apack	CF800	high	31.4	20.7	48.4
Thermaltake	Jungle512	high	31.6	20.4	60.8
Coolage	Frozen Orb F0-Z924AL	high	32.0	19.9	48.9
Xigmatek	AIO-S80DP	high	32.4	21.4	55.0
Scythe	Katana II		32.5	18.6	37.9
Rosewill	RCX-Z2		32.6	19.3	59.9
Zalman	CNPS7700-Cu	high	32.9	19.7	50.7
Apack	CF900	high	32.9	20.3	48.3
Evercool	PT02-9232CP		33.3	19.9	63.3
Zalman	CNPS7700-Cu LED	high	33.5	20.6	49.8
Intel	Stock Pentium D	high	33.8	20.7	47.5
nPowerTek	SF775-2	high	34.7	21.1	64.6
Akasa	AK-960E		36.1	21.4	56.3
Zalman	CNPS7500-Cu LED	high	36.4	22.9	50.9
Thermalfly	I75DUH		37.8	22.8	48.7
Akasa	AK-975CU	high	38.4	23.0	47.7
Cooljag	OAK-H	high	38.5	22.9	55.7
Cooljag	OAK-H2	high	38.6	24.1	55.6
LS Cable	SHS-T700		38.7	22.8	48.5
Intel	Stock Pentium D	low	40.3	23.9	40.5
Akasa	AK-975CU	low	48.1	28.4	39.9
Intel	Stock Core 2 Duo		49.2	29.0	36.7
Spire	Fourier IV SP607B3-C		63.6	18.7	60.2
Cooljag	OAK-H	low	95.3	54.5	29.5
			150w thermal test (°c)	85w thermal test (°c)	noise level (dba)
*heatsinks are ranked according to the 150w thermal test results column (rise over ambient temp.). low temperatures with low noise levels are considered best. for reference heatsinks with variable-speed fans, only the high speed (12v) fan test result is included in the comparison sheet; more detailed results reside in each specific heatsink review.

frostytech tests intel heatsinks with two thermal values that represent the upper limits of its single and multi-core processors. to start with, a 150w heat load was applied by the intel lga775 version of frostytech's synthetic thermal test platform. At full fan speed the Akasa AK-975Cu heatsink was able to maintain a rise above ambient temperature of 38.4°C (47.7dBA).

The speed of the 70mm fan on the AK-975Cu heatsink was then reduced to about 1000RPM. With a reduced fan speed noise levels decreased to 39.9 dBA, and the test temperatures rose to 48.1°C over ambient.

When faced with a 150W heat load and a slowly spinning fan, Akasa AK-975Cu heatsink yields average to satisfactory results.

For the next round of tests an 85W heat load was selected. The Akasa AK-975Cu heatsink maintained 23.0°C rise over ambient at default fan speed, and 28.4°C at a reduced fan speed. Once again, fairly satisfactory results.

Compared to the stock Intel Pentium D/Core 2 Duo bifurcated-fin heatsinks, the Akasa AK-975Cu heatsink runs about 5-8°C hotter with approximately equivalent noise levels. Therefore, unless the application calls for a low profile heatsink with a directionally mounted fan to take advantage of the forced air cooling in a 2U server chassis, the Akasa AK-975Cu will come up short in the desktop environment. In that environment, larger fans and more freedom in heatsink size and shape provide serious advantages.

Related Articles:

For more reviews on the latest heatsinks and cooling solutions, rely on FrostyTech's inventory of 400+ heatsink reviews. Here are a few other articles that you might enjoy as well...

- Thermalright Ultra-90 Low Noise Heatsink Review
- Asus Arctic Square Heatsink Review
- Xigmatek HDT-S963 Exposed Heatpipe Base Heatsink Review
- nPowertek NPH-1000 Heatsink
- Intel Stock Core 2 Duo Radial Curved Bifurcated Fin Heatsink Review
- Scythe Kama Cross SCKC-1000 Heatsink
- Evercool Buffalo HPFA-10025 AMD Heatsink Review
- Scythe Mine Rev.B SCMN-1100 Heatsink Review
- Akasa AK-876 AMD Athlon64 Heatsink Review
- Scythe Katana II SCKTN-2000 Heatsink Review
- Akasa Evo Blue AK-922 Heatsink Review
- Coolage Freezer Orb F0-Z924AL Intel Heatsink Review