FrostyTech Mk.II
Synthetic Thermal Heatsink Test Results
Intel Pentium D / Extreme
Edition & Quad Core class heatsinks tested at 150W Intel Core
2 Duo / Pentium 4 / Celeron class heatsinks tested at
85W Results based on readings
from a 30x30mm copper interface die with 150W and 85W heat loads
applied on the LGA775 version of the Mk.II Test Platform.
Temperature results listed for each heatsink were calculated by
determining the rise over ambient temperatures at time of test.
Information on Frostytech's test methodology is available
here. |
 |
Socket 775
compatible CPU heatsinks | |
manufacturer: |
model no.: |
fan speed: |
150w thermal test*
(°c) |
85w thermal test
(°c) |
noise level (dba) |
|
Thermalright |
Ultra 120 |
|
17.8 |
10.6 |
53.7 |
Zalman |
CNPS9700 LED |
high |
19.0 |
10.4 |
56.5 |
Enzotech |
Ultra-X |
high |
20.0 |
8.5 |
59.1 |
Apack |
Zerotherm BTF90 |
|
21.8 |
12.7 |
52.1 |
Apack |
Zerotherm BTF80 |
|
22.8 |
13.9 |
51.9 |
Akasa |
AK-920 |
high |
24.3 |
14.1 |
52.9 |
Thermalfly |
F1-IACSHA |
high |
29.0 |
18.3 |
60.4 |
Thermalfly |
I75DUB |
high |
29.5 |
16.8 |
68.5 |
Zalman |
CNPS9500 AT |
|
29.6 |
17.3 |
53.3 |
Alpha Novatech |
PRE9060M92P |
high |
29.9 |
18.5 |
51.5 |
Akasa |
AK-961 |
|
30.0 |
18.7 |
60.7 |
nPowertek |
NPH-775-1 |
|
30.1 |
18.8 |
50.1 |
Sunon |
Waturbo |
|
30.6 |
18.3 |
57.5 |
Apack |
CF800 |
high |
31.4 |
20.7 |
48.4 |
Thermaltake |
Jungle512 |
high |
31.6 |
20.4 |
60.8 |
Xigmatek |
AIO-S80DP |
high |
32.4 |
21.4 |
55.0 |
Zalman |
CNPS7700-Cu |
high |
32.9 |
19.7 |
50.7 |
Apack |
CF900 |
high |
32.9 |
20.3 |
48.3 |
Evercool |
PT02-9232CP |
|
33.3 |
19.9 |
63.3 |
Zalman |
CNPS7700-Cu LED |
high |
33.5 |
20.6 |
49.8 |
Intel |
Stock Pentium D |
high |
33.8 |
20.7 |
47.5 |
nPowerTek |
SF775-2 |
high |
34.7 |
21.1 |
64.6 |
Akasa |
AK-960E |
|
36.1 |
21.4 |
56.3 |
Thermalfly |
I75DUH |
|
37.8 |
22.8 |
48.7 |
Cooljag |
OAK-H |
high |
38.5 |
22.9 |
55.7 |
Cooljag |
OAK-H2 |
high |
38.6 |
24.1 |
55.6 |
LS Cable |
SHS-T700 |
|
38.7 |
22.8 |
48.5 |
Thermalfly |
I75DUB |
low |
47.0 |
28.5 |
38.7 |
Cooljag |
OAK-H |
low |
95.3 |
54.5 |
29.5 |
|
|
|
150w thermal test
(°c) |
85w thermal test
(°c) |
noise level (dba) |
*heatsinks are ranked according to
the 150w thermal test results column (rise over ambient temp.). low
temperatures with low noise levels are considered best. for reference
heatsinks with variable-speed fans, only the high speed (12v) fan test
result is included in the comparison sheet; more detailed results reside
in each specific heatsink review. |
The heat output from Intel
processors varies widely between single and multi-core processors, so we've settled on two values which
represent the upper limit of both existing CPU families.
With a 150W
heat load applied by the Intel LGA775 version of
FrostyTech's synthetic thermal test platform, the Thermalfly I75DUB heatsink yields
a good rise above ambient temperature of 29.5°C, with 68.5dBA noise. When its' fan speed is dropped down
to 900RPM, the temperature on the 150W test die rises to an average 47.0°C over
ambient. Noise levels fall to a whispery 38.7 dBA.
The
Thermalfly I75DUB heatsink was also tested with an 85W heat load, and that
resulted in a very nice 16.8°C rise over ambient temperatures. With fan speed once
again dialed down, the I75DUB heatsink reacts in a predictable
manner and CPU die temperatures hold steady at 28.5°C over
ambient.
On the whole the Thermalfly
I75DUB heatsink performs quite well at full
fan speed (3600RPM), although
we have to admit that the noise levels in this mode are far too audible to accept for
any extended length of time.
On the plus
side, the embedded thermistor is correctly located to allow the I75DUB to react
to its actual temperature, and scale fan speed appropriately. That should allow
the Thermalfly I75DUB heatsink to operate in the mid-range between the two
noise levels we've quoted previously.
Still, the Thermalfly I75DUB heatsink edges out the
stock Intel Pentium D thermal solution by 4°C at full tilt. It's an interesting
comparison given both heatsinks are so close in proportion. Overall, this makes
the Thermalfly I75DUB heatsink is a good solution, however it lacks the critical
capability of cooling better than the stock Intel heatsink, with
reduced noise
levels.
Related
Articles:
For more reviews on the latest heatsinks and
cooling solutions, rely on FrostyTech's inventory of 350+ heatsink reviews. Here are a
few other articles that you might enjoy as well...
- Xigmatek
AIO-S80DP Self-Contained Watercooling Heatsink Review
- TTIC nPowerTek
NPH-K8 Big Heatsink Review
- LS Cable SHS-T700 Heatsink Review
- TTIC nPowerTek
NPH-K8 Big Heatsink Review
- Enzotech Ultra-X Heatsink Review
- Akasa EVO 120
AK-920 Low Noise Heatsink Review
- Akasa AK-960E
Socket 775 Heatsink Review
- Apack Zerotherm
CF900 Socket 775 Heatsink Review
- Alpha Novatech
PRE9060M92P Socket 775 Core 2 Duo Heatsink Review
- Zalman
CNPS7700-Cu LED Low Noise Heatsink Review
- Zalman CNPS9700
LED Low Noise Heatsink Review
- nPowerTek NPH
SF775-2 Radial Fin Socket 775 Heatsink
Review