ASUS Surface Roughness Comparison - Crux P4 XB7N FrostyTech Review

Surface Roughness Comparator:

Surface finish is an important factor that we all look for when holding a new heatsink. Flipping a cooler over to see how well the base has been machined is a quick way to judge the attention to detail that was put into making it. The following FrostyTech Surface Roughness Comparator offers a concise cross section common machine surface finishes. Not every heatsink base will fit into the envelope of this gage, but it does offer a very handy set of representations.

This commercially available gage has 22 machined surfaces from 2 to 500 microinches; Lapped (2, 4, and 8 µ" RA), Ground (8, 16, 32, and 63 µ" RA), Blanchard Ground (16 and 32 µ" RA), Shape Turned (32, 63, 125, 250, and 500 µ" RA), Profiled (63, 125, 250, and 500 µ" RA), and Milled (63, 125, 250, and 500 µ" RA).

FrostyTech Surface Roughness Comparator

the base of a heatsink plays an important role in how well the cooling apparatus interfaces with the processor. poor surface roughness will affect a good heatsink just as much as a good surface finish will improve thermal conductivity. in an effort to put a more quantitative spin on the comments we provide about base finishes, frostytech has begun using a surface roughness comparator.

move your mouse over the image above to see an example at right. numbers are in microinches, and finishes from 2 microinches to 32 microinches are excellent-to-good.

Evaluation Notes:

The Asus Crux P4-XB7N heatsink has a surface roughness of approximately 32 microinches, which is considered very good. Move your mouse over the tabs above and look at 32M for an approximate example of what this surface finish looks like.

Acoustic Samples: Listen to this Heatsink!

As this is a thermally controlled fan, it ranges in noise levels from near silent to moderately loud depending on the temperature. However, in its natural state the Crux P4 XB7N is quiet low on the noise scale. To listen to this heatsink for yourself in operation, be sure to click on the little headphones icon below and download the Acoustic Sample MP3 file.

FrostyTech Acoustic Sampling Chamber

Standard Waveform view of a 10 second recording. Click on the headphones to listen to an MP3 recording of this heatsink in operation.

Sound Level Measurements:

Listening to the actual noise a heatsink makes allows you to hear what pure numbers alone cannot get across. To further emphasize FrostyTech's reliance on cold hard facts when evaluating a heatsink, we also take Decibel readings with a sound level meter. These results may be higher than the manufacturer's listed specs, but then again these are real world measurements. Measurements are made on the dB (A) scale.

FrostyTech Sound Level Results

- Manufacturer Model Noise Level Scale

TS Heatronics NCU-1000 passive N/A

Verax P16Cu 31.5 dB

Verax P16 35.3 dB

Asus Crux P4 XB7N (L) 38.5 dB

Spire SP420B8 40.2 dB

Verax (high) P17CuX 40.8 dB

Zalman CNPS7000-Cu 41.7 dB

ArcticCooling SuperSilent4 Pro 41.8 dB

Zalman CNPS6500-AlCu 47.4/28.9 dB

Zalman CNPS7000A-Cu 42.2 dB

Intel Socket 478 42.5 dB

CoolJag JVC661A 43.9 dB

Evercool NW9F715CA 47.3 dB

Intel Stock 3.06GHz 47.5 dB

AVC Z7H2403012 48.2 dB

Aopen ACP4LC 48.7 dB

Evercool CUW8-715 50.7 dB

Taisol CEP426151A 50.7 dB

Scythe Kamakaze 51.0 dB

Arkua 838T-7G 51.7 dB

Verax Polargate AL S 52.5 dB

Jetart JAP416A 52.8 dB

Asus Crux P4 XB7N (H) 52.9 dB

Thermal Integration TI-RV108N 52.9 dB

JMC Products 401100 53.0 dB

Thermal Integration (high) TI-V7035TN 53.6 dB

Zalman CNPS5700D-Cu 53.8 dB

Coolermaster (high) Hyper6 KHCV81U1 54.1 dB

Globalwin VA476 54.2 dB

Thermal Integration TI-A8736N 54.8 dB

TTIC NPH-101 55.3 dB

Jetart JAP407A 55.7 dB

Alpha S-PAL8952 55.8 dB

AVC 117140 56.1 dB

Vantec VP4-7245 56.8 dB

Taisol CEP447181 56.8 dB

Coolermaster (high) Jet4 58.9 dB

Cooljag (high) CJC66IC-A 59.1 dB

Dynatron DC1U-B02 62.2 dB

Gigabyte (high) PCU31-VH 63.7 dB

AVC Z7U7408001 64.2 dB louder

When case temperatures are low, the Asus Crux P4 XB7N heatsink is nearly silent, outputting a little over 38 dBA. When the fan senses an increase in temperature, it increases its speed to cool better. At its maximum speed of 5400RPM, the little Delta fan on the Crux P4 creates about 53 dBA of noise. Up next, the temperature test results!

FrostyTech.com Since June 1999	Find a Heatsink . Latest Heatsink Reviews . Top 5 Heatsinks Tested . Top 5 Low Profile Heatsinks . Top 5 Liquid Coolers . Heatsinks by Mfgr / Brand	Social Media . Facebook . Twitter . Pinterest	FrostyTech.com Info . Feedback . Contact Us / Heatsink Submissions . Submit News . Privacy Policy
© Copyright 1999-2024 www.frostytech.com All Rights Reserved. Privacy policy and Terms of Use Images © FrostyTech.com and may not be reproduced without express written permission. Current students and faculty of accredited Universities may use Frostytech images in research papers and thesis, provided each image is attributed.

	TOP 5 Heat Sinks TOP 5 Low Profile Heat Sinks TOP 5 Liquid Coolers Heatsinks by Brand / Mfgr Reviews + Articless Advanced Search