FrostyTech.com Heatsink Reviews and Analysis
   
  

TOP 5 Heat Sinks     TOP 5 Low Profile Heat Sinks     TOP 5 Liquid Coolers    
 Heatsinks by Brand / Mfgr      Reviews + Articless     Advanced Search    

Zalman CNPS3000 FHS Heatsink
Zalman CNPS3000 FHS Heatsink
  83%   
Abstract: There are two variety of copper fined heatsinks from the Korean company, Zalman. The first, the CNPS3100 has about 50 fins, and weighs in at 296 grams, the second is this heatsink the CNPS3000.

 Manufacturer  Category  Published  Author 
Zalman   Cooling / Heatsinks   Apr 29, 2001   Max Page  

Home > Reviews > Page: More features and the test bed

The unique construction of the CNPS3000 is shown in this picture of the center portion, relative to that of the CNPS3100 on the bottom. In the manufacturing process, 40 groups of individual fins are tightly bonded together with a vice, bolted together and then smoothly milled flat.

There is no fan directly mounted on the heatsink , but rather the 80mm fan is mounted directly to the case with a metal bracket. The end result is that the CNPS3000 can use a lower RPM, larger 80x80x25mm fan to move more air over its' fins quietly.

The fan attachment measures 17.5x17x4cm and screws onto the case by using the first three slot card screw positions. The 25cm long fan wire plugs directly into the motherboard to offer RPM monitoring. A special "noiseless" adapter cable drops the voltage going to the fan to offer even quieter operation. The fan is a 12V, 0.25A "power cooler" brand.

Also included in with the heatsink are a small syringe of thermal grease, a set of screws to attach the fan to the case, and the stainless steel clip used to hold the CNPS3000 in place.

Since the cooling fan mounts above the heatsink there are never really any issues with it being in the way unless you are using a mini-tower which has the power supply positioned above the cpu. In that case you would not be able to use this cooler.

The heatsink itself is 65mm in height, and between 100-110mm in length. While we haven't tested it out on the Abit VP6, we have been told that it will contact the back of the AGP card slightly. A bit of bending or some cutting to the fins should easily remedy that issue however.

When the 80mm fan is mounted in place there's about 1cm worth of space above the heatsink fins. Depending on the case you use, and the motherboard in your system, the fan may be directly above the heatsink or off to one side. Our test setup was just about on center. So long as the fan is at least partially over the heatsink Zalman claim the any offset will have a minor impact.

Now that you've seen how this heatsink is put together, and how it fits on your cpu, it's about time we showed you some results from our testing.

Let's go and check out how the CNPS3000 scored on the Frosty Synthetic Temperature Test platform against a variety of heatsinks you know...

FrostyTech Synthetic Temperature Test Platform:

The FrostyTech Synthetic Temperature Test Platform consists of an aluminum block heated by a 120V 250 Ohm precision resistor producing 50W of heat. That heat is transmitted to the heatsink via the aluminum block and up through special copper die templates with thermistors embedded directly in them.

A temperature reading for a particular heatsink is taken once the temperature stabilizes in the copper die template. Since each of the die templates have the surface area of either a silicon topped or heatspreader-topped processor the flow of heat to the base of the heatsink accurately mimics a real life configuration.

Shown with the copper die template for a silicon-topped processor, the synthetic heatsink test apparatus awaits a coating of silver-based thermal compound and the Zalman CNPS3000 FHS heatsink. A slightly larger copper die template was used to test the effective cooling ability of the CNPS3000 atop a heatspreader-based processor like an overclocked PGA Celeron processor.

 Previous Page ° ° Next Page 

Table of Contents:

 1:  Zalman CNPS3000 FHS Heatsink
 2:  The CNPS3000 from several angles:
 3: — More features and the test bed
 4:  Results and Final Conclusions

List all Zalman heat sinks that Frostytech tested?

Facebook RSS Feed Twitter
Resources
° Got Feedback?
° Mk.II Test Platform
° Where To Buy?
° Manufacturer Index
° Industry Dir.
° Cooling Projects
Recently Tested

Scythe Mugen 5 Rev B SCMG-5100 Heatsink Review

Gelid Tranquillo 4 Air Cooled Heatsink Review

Coolermaster Ergostand III Laptop Cooling Stand Review

Noctua NH-D9DXi4-3U LGA2011 Xeon Server/Workstation Heatsink Review

Noctua NH-L9x65 Low Profile Heatsink Review

Scythe Fuma SCFM-1000 Heatsink
...More Articles >>


Websites you may also like:
PCSTATS


FrostyTech.com
Since June 1999


Find a Heatsink
Latest Heatsink Reviews
Top 5 Heatsinks Tested
Top 5 Low Profile Heatsinks
Top 5 Liquid Coolers
Heatsinks by Mfgr / Brand


Social Media
Facebook
Twitter
Pinterest


FrostyTech.com Info
Feedback
Contact Us / Heatsink Submissions
Submit News
Privacy Policy
Suite 66

© Copyright 1999-2023 www.frostytech.com All Rights Reserved. Privacy policy and Terms of Use
Images © FrostyTech.com and may not be reproduced without express written permission. Current students and faculty of accredited Universities may use Frostytech images in research papers and thesis, provided each image is attributed.