FrostyTech.com Heatsink Reviews and Analysis
      
TOP 5 Heat Sinks     TOP 5 Low Profile Heat Sinks     TOP 5 Liquid Coolers    
 Reviews + Articless     News     HSF Mfg's Index     Advanced Search    

Akasa EVO 120 AK-920 Low Noise Heatsink Review
Akasa EVO 120 AK-920 Low Noise Heatsink Review
  88%   
Abstract: The new, 2007 model Akasa EVO 120 improves on these shortcomings with a stocky copper base, and three chunky 8mm diameter heatpipes.

 Company link  Category  Published  Author 
akasa   Cooling / Heatsinks   Jan 31, 2007   Max Page  
Home > Reviews > Page Title: 360° View - Akasa EVO 120 heatsink

360° View - Akasa Evo120 Heatsink
Information on Frostytech's test methodology is available here.
The Heatsink Fan:
The Akasa EVO 120 heatsink is equipped with a 120x120x25mm fan that spins in the region of 1000-2000RPM. Anything big and relatively slow is fairly quiet as a result. Owing to the design of the heatsink, there is no protection from errant wires being sucked into the fans' impeller; so it's best to organize you computer appropriately during installation. The fan draws power from a standard 3-pin motherboard fan header, or it can be connected to the supplied Akasa fan speed controller (fits into a PCI bracket). The orange impeller of the translucent plastic fan is not internally illuminated.
The Heatsink Front:
With the 120mm fan removed, it's surprising how little of the heatsink's cooling fins are actually visible. The three heatpipes spread the heat out over the length of the 120mm long fins, which are pretty widely spaced. To ensure compatibility with a wider number of computer chassis, the cooling fins are set off center to one side. This way the Akasa EVO 120 can be installed in situations where the CPU socket is close to videocard, the power supply, or some other tall component.

Heatsink Top:
Looking down from the top of the Akasa EVO 120 heatsink we can see the mounting clips for K8 processors at either side of the copper base. The upper portion of the heatsink is 35mm thick, and with the fan, 60mm. The 50-odd aluminum fins are only 30mm wide.

Heatsink Side A:
Each aluminum fin on the Akasa EVO 120 heatsink measures 0.4mm thick, and the fin pitch is ~1.5mm. The cooling fins don't quite extend the full height of the 120mm fan, and instead occupy an area of 125x96mm. There is about 30mm clearance between the bottom of the heatsink and the surface of the motherboard.

Heatsink Side B:
The cooling fins of the Akasa EVO 120 heatsink are set off center from the base block. This makes installation easier since screws are accessible without removing the fan. Depending on the orientation of the CPU socket with respect to adjacent components, the overhang of the heatpipes and cooling fins may cause interference. Each of the copper heatpipes is soldered to the base block.

Heatsink Base:
The copper base that comes in contact with the CPU measures 40x44mm in size, more than sufficient to fully cover the surface of a socket 939 AMD Athlon64 processor. The steel mounting brackets screw into the copper with a couple of machine screws at either side, and this allows the Akasa EVO 120 to be installed on a variety of Intel and AMD processor formfactors. Surface roughness is on the order of ~63 microinches, which is considered satisfactory. The copper is flat, and has a sanded finish.



 Previous Page °
° Next Page 

Table of Contents:

 1:  Akasa EVO 120 AK-920 Low Noise Heatsink Review
 2: — 360° View - Akasa EVO 120 heatsink
 3:  Acoustic Comparisons and Base Surface Quality
 4:  K8 AMD Heatsink Temperature Comparisons
 5:  Intel 775 Heatsink Temperature Comparisons

List all akasa heat sinks that Frostytech tested?

Follow Frostytech on FacebookFrostytech News RSS FeedFollow frostytech on Twitter
Resources
° Got Feedback?
° Mk.II Test Platform
° Where To Buy?
° Manufacturer Index
° Industry Dir.
° Cooling Projects

Scythe Ninja 4 SCNH-4000 Heatsink Review

DeepCool Maelstrom 240 Liquid Cooling System Review

DeepCool Gamer Storm Lucifer K2 Heatsink Review

Gelid Antarctica Heatsink Review

Noctua NH-D9L 3U Low Noise Heatsink Review

BeQuiet Shadow Rock LP Heatsink Review
...More Articles >>




Websites you may also like:
PCSTATS

Google Search Frostytech

Time stamped: 7:28PM, 11.19.2017
In Case You Missed it...
°  Scythe Mugen 5 Rev B SCMG-5100 Heatsink Review

°  Samsung to continue adopting heat pipes for smartphones in 2018

°  be quiet! Dark Base 700 Case Review

°  Cooler Master MasterBox Pro 5 Revealed

°  ARCTIC Freezer 33 eSports Edition CPU Cooler Review

°  Heatpipes to watercooler CPU Heatsink - DIY




FrostyTech.com
Since June 1999


Find a Heatsink / RSS Feeds
Latest Heatsink Reviews
Top 5 Heatsinks Tested
News RSS Feed
Reviews RSS Feed


Social Media
Facebook
Twitter
Pinterest


FrostyTech.com Info
Feedback
Contact Us / Heatsink Submissions
Submit News
Legal
Suite 66
© Copyright 1999-2017 www.frostytech.com All Rights Reserved. Privacy policy and Terms of Use
Images © FrostyTech.com and may not be reproduced without express written permission.
Current students and faculty of accredited Universities may use Frostytech images in research papers and thesis, provided each image is attributed.