FrostyTech.com Heatsink Reviews and Analysis
   
  

TOP 5 Heat Sinks     TOP 5 Low Profile Heat Sinks     TOP 5 Liquid Coolers    
 Heatsinks by Brand / Mfgr      Reviews + Articless     Advanced Search    

Spire Verticool SPA49B0 Socket A Heatsink Review
Spire Verticool SPA49B0 Socket A Heatsink Review
  73%   
Abstract: A single 80x25mm fan forces air through a stacked array of aluminum fins, connected to the lower half of the heatsink by two "U" shaped 6mm diameter copper heatpipes.

 Manufacturer  Category  Published  Author 
Spire   Cooling / Heatsinks   May 01, 2005   Max Page  

Home > Reviews > Page: Surface Roughness and Acoustic Comparisons

Surface finish is an important factor that we all look for when holding a new heatsink. Flipping a cooler over to see how well the base has been machined is a quick way to judge the attention to detail that was put into making it. The following FrostyTech Surface Roughness Comparator offers a concise cross section common machine surface finishes. Not every heatsink base will fit into the envelope of this gage, but it does offer a very handy set of representations.

This commercially available gage has 22 machined surfaces from 2 to 500 microinches; Lapped (2, 4, and 8 µ" RA), Ground (8, 16, 32, and 63 µ" RA), Blanchard Ground (16 and 32 µ" RA), Shape Turned (32, 63, 125, 250, and 500 µ" RA), Profiled (63, 125, 250, and 500 µ" RA), and Milled (63, 125, 250, and 500 µ" RA).

FrostyTech Surface Roughness Comparator
2L4L8L8G16G16BL32G32BL32ST63G63M63P63ST125M125P125ST250M250P250ST500M500P500ST

the base of a heatsink plays an important role in how well the cooling apparatus interfaces with the processor. poor surface roughness will affect a good heatsink just as much as a good surface finish will improve thermal conductivity. in an effort to put a more quantitative spin on the comments we provide about base finishes, frostytech has begun using a surface roughness comparator.

move your mouse over the image above to see an example at right. numbers are in microinches, and finishes from 2 microinches to 32 microinches are excellent-to-good.

Evaluation Notes:

The Spire SPA49B0 heatsink has a surface roughness of approximately 8 microinches, which is considered very good. Move your mouse over the tabs above and look at 8G for an approximate example of what this surface finish looks like.

Acoustic Samples: Listen to this Heatsink!

With the Spire Verticool SPA49B0 powered up, noise levels are low frequency, and not very noticeable. It will work well in any application that calls for a mainstream Socket A AMD heatsink. To listen to this heatsink in operation, be sure to click on the little headphones icon below and play the sample MP3 file.

FrostyTech Acoustic Sampling Chamber - Low
Standard Waveform view of a 10 second recording. Click on the headphones icon to listen to an MP3 recording of this heatsink in operation.
Listen to this Heatsink now.

Sound Level Measurements:

Listening to the actual noise a heatsink makes allows you to hear what pure numbers alone cannot get across. To further emphasize FrostyTech's reliance on cold hard facts when evaluating a heatsink, we also take Decibel readings with a sound level meter. These results may be higher than the manufacturer's listed specs, but then again these are real world measurements. Measurements are made on the dB (A) scale.

FrostyTech Sound Level Results
Manufacturer: Model: Noise Level:
Scythe NCU-2000 passive Quiet
Verax P16Cu 31.5 dB
Spire SP420B8 40.2 dB
Verax (high) P17CuX 40.8 dB
Zalman CNPS7000-Cu 41.7 dB
ArcticCooling SuperSilent4 Pro 41.8 dB
Zalman CNPS7000A-Cu 42.2 dB
Spire SPA49B0 44.5 dB
Evercool NW9F715CA 47.3 dB
Scythe SCKK1000 47.4 dB
Intel Stock 3.06GHz 47.5 dB
AVC Z7H2403012 48.2 dB
Aopen ACP4LC 48.7 dB
Gigabyte PCU22-SE 50.5 dB
Scythe Kamakaze 51.0 dB
Verax Polargate AL S 52.5 dB
Jetart JAP416A 52.8 dB
Asus Crux P4 XB7N (H) 52.9 dB
JMC Products 401100 53.0 dB
Coolermaster (high) Hyper6 KHCV81U1 54.1 dB
Thermal Integration TI-A8736N 54.8 dB
Scythe (high) SCSM1000 55.5dB
Alpha S-PAL8952 55.8 dB
AVC 117140 56.1 dB
Vantec VP4-7245 56.8 dB
Taisol CEP447181 56.8 dB
Coolermaster (high) Jet4 58.9 dB
Cooljag JACE2DC/180 59.2 dB
Cooljag E44C/180 60.9 dB
Cooljag 2QC/180 61.1 dB
Dynatron DC1U-B02 62.2 dB
Gigabyte (high) PCU31-VH 63.7 dB
AOpen ACP4SH 67.1 dB Louder

Listening to the pitch of heatsink's fan is one thing, but how loud is the Spire SPA49B0 in the real world? According to our measurements, the Spire Verticool heatsink outputs approximately 44.5dBA, which puts it towards the quieter end of this reference list.

 Previous Page ° ° Next Page 

Table of Contents:

 1:  Spire Verticool SPA49B0 Socket A Heatsink Review
 2:  Examining the Heatsink
 3:  Heatsink Thermal/Acoustic Test Parameters
 4: — Surface Roughness and Acoustic Comparisons
 5:  Final Heatsink Temperature Comparisons

List all Spire heat sinks that Frostytech tested?

Facebook RSS Feed Twitter
Resources
° Got Feedback?
° Mk.II Test Platform
° Where To Buy?
° Manufacturer Index
° Industry Dir.
° Cooling Projects
Recently Tested

Scythe Mugen 5 Rev B SCMG-5100 Heatsink Review

Gelid Tranquillo 4 Air Cooled Heatsink Review

Coolermaster Ergostand III Laptop Cooling Stand Review

Noctua NH-D9DXi4-3U LGA2011 Xeon Server/Workstation Heatsink Review

Noctua NH-L9x65 Low Profile Heatsink Review

Scythe Fuma SCFM-1000 Heatsink
...More Articles >>


Websites you may also like:
PCSTATS


FrostyTech.com
Since June 1999


Find a Heatsink
Latest Heatsink Reviews
Top 5 Heatsinks Tested
Top 5 Low Profile Heatsinks
Top 5 Liquid Coolers
Heatsinks by Mfgr / Brand


Social Media
Facebook
Twitter
Pinterest


FrostyTech.com Info
Feedback
Contact Us / Heatsink Submissions
Submit News
Privacy Policy
Suite 66

© Copyright 1999-2023 www.frostytech.com All Rights Reserved. Privacy policy and Terms of Use
Images © FrostyTech.com and may not be reproduced without express written permission. Current students and faculty of accredited Universities may use Frostytech images in research papers and thesis, provided each image is attributed.