FrostyTech.com Heatsink Reviews and Analysis
   
  

TOP 5 Heat Sinks     TOP 5 Low Profile Heat Sinks     TOP 5 Liquid Coolers    
 Heatsinks by Brand / Mfgr      Reviews + Articless     Advanced Search    

Titan TTC-D9TB-Cu35R1 Copper Core Heatsink Review
Titan TTC-D9TB-Cu35R1 Copper Core Heatsink Review
  78%   
Abstract: The TTC-D9TBCu35-R1 breaks from this mold slightly, and offers consumers a low-noise cooling solution for mainstream PCs.

 Manufacturer  Category  Published  Author 
Titan   Cooling / Heatsinks   Dec 27, 2003   Max Page  

Home > Reviews > Page: Surface Roughness / Acoustic Comparisons

Surface Roughness Comparator:

Surface finish is an important factor that we all look for when holding a new heatsink. Flipping a cooler over to see how well the base has been machined is a quick way to judge the attention to detail that was put into making it. The following FrostyTech Surface Roughness Comparator offers a concise cross section common machine surface finishes. Not every heatsink base will fit into the envelope of this gage, but it does offer a very handy set of representations.

This commercially available gage has 22 machined surfaces from 2 to 500 microinches; Lapped (2, 4, and 8 µ" RA), Ground (8, 16, 32, and 63 µ" RA), Blanchard Ground (16 and 32 µ" RA), Shape Turned (32, 63, 125, 250, and 500 µ" RA), Profiled (63, 125, 250, and 500 µ" RA), and Milled (63, 125, 250, and 500 µ" RA).

FrostyTech Surface Roughness Comparator
2L 4L 8L 8G 16G 16BL 32G 32BL 32ST 63G 63M 63P 63ST 125M 125P 125ST 250M 250P 250ST 500M 500P 500ST

The base of a heatsink plays an important role in how well the cooling apparatus interfaces with the processor. Poor surface roughness will affect a good heatsink just as much as a good surface finish will improve thermal conductivity. In an effort to put a more quantitative spin on the comments we provide about base finishes, FrostyTech has begun using a Surface Roughness Comparator.

Move your mouse over the image above to see an example at right. Numbers are in Microinches, and finishes from 2 microinches to 32 microinches are excellent-to-good.

Evaluation Notes:

The Titan TTC-D9TBcu35-R1 heatsink had a surface roughness of approximately 4L, which is considered excellent. Move your mouse over the 4L tab above to see a large scan of what this surface roughness looks like.

Acoustic Samples: Listen to this Heatsink!

The large fan on the Titan heatsink is really very quiet, and I highly doubt anyone will notice it in operation outside the PC enclosure. To listen to this heatsink for yourself in operation, be sure to click on the little headphones icon below and download the Acoustic Sample MP3 file.

(high) FrostyTech Acoustic Sampling Chamber

Standard Waveform view of a 10 second recording. Click on the headphones to listen to an MP3 recording of this heatsink in operation.
Listen to this Heatsink now.

Sound Level Measurements:

Listening to the actual noise a heatsink makes allows you to hear what pure numbers alone cannot get across. To further emphasize FrostyTech's reliance on cold hard facts when evaluating a heatsink, we also take Decibel readings with a sound level meter. These results may be higher than the manufacturer's listed specs, but then again these are real world measurements. Measurements are made on the dB (A) scale.

FrostyTech Sound Level Results
- Manufacturer Model Noise Level Scale
Verax (low RPM) P14Cu 31.2 dB Quiet
Verax P11T 35.3 dB
Spire SPA04B4 35.3 dB
Spire 5U213C1H3G 35.7 dB
Titan D9TBCu35R1 37.6 dB
ArcticCooling CuSilent2 37.9 dB
Aopen ACK7L 40.4 dB
Coolermaster HSC-V62 43.7 dB
Akasa AK821 44.2 dB
Spire 5F263 44.5 dB
Zalman All Flower HSF 47.4/28.9 dB
Arkua 728M-7N01 48.2 dB
Taisol CGK760092 48.4 dB
Cho-Liang CB0307U-17 49.5 dB
Titan TTC-CU9TB/SC 50.5 dB
Taisol CEK787172 50.7 dB
nPowerTek TTIC NPH-2 50.7 dB
Arkua 628 50.7 dB
Scythe Kamakaze 51.0 dB
Tocools Novasonic 52.2 dB
Tocools Novasonic-AlCu 52.4 dB
Thermal Integration TI-V77L 53.0 dB
Sibak AE01625B 58.2 dB
AVC Tundra 2 58.4 dB
Sibak AC02625B 59.7 dB
Coolermaster HHC-001 59.9 dB
Sibak AC06725TH 62.4 dB
Dynatron DC1206BMP 65.1 dB
Thermalright SLK800 66.2 dB
Thermalright AX-7 66.4 dB louder

The low noise Titan TTC-D9TBcu35-R1 produces just 37.6 dBA under power - making it among of the quietest of socket A heatsinks we have tested. The fan speed controller does give you the option of turning the speed even further, but I don't this would be necessary.

 Previous Page ° ° Next Page 

Table of Contents:

 1:  Titan TTC-D9TB-Cu35R1 Copper Core Heatsink Review
 2:  Close examination of the heatsink
 3:  Heatsink Thermal/Acoustic Test Parameters
 4: — Surface Roughness / Acoustic Comparisons
 5:  Temperature Results

List all Titan heat sinks that Frostytech tested?

Facebook RSS Feed Twitter
Resources
° Got Feedback?
° Mk.II Test Platform
° Where To Buy?
° Manufacturer Index
° Industry Dir.
° Cooling Projects
Recently Tested

Scythe Mugen 5 Rev B SCMG-5100 Heatsink Review

Gelid Tranquillo 4 Air Cooled Heatsink Review

Coolermaster Ergostand III Laptop Cooling Stand Review

Noctua NH-D9DXi4-3U LGA2011 Xeon Server/Workstation Heatsink Review

Noctua NH-L9x65 Low Profile Heatsink Review

Scythe Fuma SCFM-1000 Heatsink
...More Articles >>


Websites you may also like:
PCSTATS


FrostyTech.com
Since June 1999


Find a Heatsink
Latest Heatsink Reviews
Top 5 Heatsinks Tested
Top 5 Low Profile Heatsinks
Top 5 Liquid Coolers
Heatsinks by Mfgr / Brand


Social Media
Facebook
Twitter
Pinterest


FrostyTech.com Info
Feedback
Contact Us / Heatsink Submissions
Submit News
Privacy Policy
Suite 66

© Copyright 1999-2023 www.frostytech.com All Rights Reserved. Privacy policy and Terms of Use
Images © FrostyTech.com and may not be reproduced without express written permission. Current students and faculty of accredited Universities may use Frostytech images in research papers and thesis, provided each image is attributed.