FrostyTech.com Heatsink Reviews and Analysis
   
  

TOP 5 Heat Sinks     TOP 5 Low Profile Heat Sinks     TOP 5 Liquid Coolers    
 Heatsinks by Brand / Mfgr      Reviews + Articless     Advanced Search    

Verax P16Cu Silent Pentium4 Heatsink Review
Verax P16Cu Silent Pentium4 Heatsink Review
  0%   
Abstract: Now gather round and listen closely, what do you hear? Do you hear a multitude of fans inside your computer spinning away as they stem off miniature silicon meltdowns?

 Manufacturer  Category  Published  Author 
Verax   Cooling / Heatsinks   Sep 12, 2003   Max Page  

Home > Reviews > Page: Cold Gas Dynamics Spraying

Cold Gas Dynamics Spraying (CGDS for short) is a relatively new process which was invented in the mid-1980's by Anatolii Papyrin, a researcher at the Institute of Theoretical and Applied Mechanics of the Russian Academy of Sciences. The process involves accelerating fine metal powders of 1-50µm in size to speeds of 300 to 1200 m/s within a stream of Helium gas.

The fine stream of metal powder is sprayed onto substrate where the impact causes deformation of both materials. In the above example copper powder is sprayed onto aluminum substrate where both materials subsequently bond by micro welding. As the powder impacts against the substrate at up to 1200m/s surface oxides are broken open and the substrate contact surface temperatures rises and leads to micro welding. The temperature of the entire process hovers around 300 degrees Celsius which is well below the melting point of either substrate or metal powder.

If we look at the construction of the Verax P16Cu heatsink, the process goes something like this... The aluminum heatsink extrusion forms the substrate to which copper power is bonded through CGDS technology. The copper layer formed on the base of the aluminum heatsink measures on the order of 0.2 mm thick, with an oxide content of less than 0.2%.

This oxide content is significant for a couple of reasons which we'll get to in just a moment. The copper section is then coated to about 0.02mm thickness with tin solder to facilitate attaching the actual copper base plate. The tin solder fills in the hair-line gaps which may exist between the Cold Gas Dynamic Sprayed layer of copper which acts as a solderable interface for the aluminum heatsink, and the 3mm thick copper plate.

You might be wondering what the point of all this is? Well, the other option of using silicon based thermal compound to act as an interface between the 3mm copper base plate and the aluminum doesn't really present the best option in terms of thermal conductivity. While silicon compound is significantly more thermally conductive than air (or any voids between the two pieces of metal), when compared to a true metal-to-metal bond it falls substantially short.

The point we were making about oxide percentages relates to the second most common process used to bond copper with dissimilar aluminum, and that is nickel plating to facilitate a solder joint. While there is nothing wrong with this process, Cold Gas Dynamic Spraying nets an advantage by the fact that is destroys most of the oxide layers which cover metal surfaces. For example aluminum can be anodized to protect its surface from the surrounding environment.

Cold Gas Dynamic Spraying is a process by which fine metal powder is accelerated to through a high velocity gas stream and impacted onto substrate surface to create a nearly oxide and alloy-free metal-to-metal forge bond. For example these four aluminum plates at left have had a thin layer of copper deposited via CGDS to form an aluminum-to-copper bond.

No other materials like solder, glue, or even high heat are required, and the metal powder remains solid to prevent further oxidization. More information on the process is available through this site at the Universität der Bundeswehr Hamburg, and here.

Anodizing basically creates a transparent oxide layer over the surface of the aluminum, and this is why anodized aluminum can be coloured black, gold, or a whole rainbow of colours. Anodized aluminum is not as thermally conductive as untreated aluminum, and so the same sort of situation stands here.

By breaking up the natural oxide layer which forms on aluminum through the metal-to-meltal micro welding brought about by Cold Gas Dynamic Spraying engineers are able to create nearly oxide and alloy-free bonds between copper and aluminum. The end result is that a better thermal interface is created between the copper and aluminum which means any heatsink making use of this technology should conduct heat energy from the copper base to the aluminum fins with less thermal resistance.

 Previous Page ° ° Next Page 

Table of Contents:

 1:  Verax P16Cu Silent Pentium4 Heatsink Review
 2: — Cold Gas Dynamics Spraying
 3:  Closer Examination of the Heatsink
 4:  Heatsink Thermal/Acoustic Test Parameters
 5:  Acoustic Samples: Listen to this Heatsink!
 6:  Final Temperature Results

List all Verax heat sinks that Frostytech tested?

Facebook RSS Feed Twitter
Resources
° Got Feedback?
° Mk.II Test Platform
° Where To Buy?
° Manufacturer Index
° Industry Dir.
° Cooling Projects
Recently Tested

Scythe Mugen 5 Rev B SCMG-5100 Heatsink Review

Gelid Tranquillo 4 Air Cooled Heatsink Review

Coolermaster Ergostand III Laptop Cooling Stand Review

Noctua NH-D9DXi4-3U LGA2011 Xeon Server/Workstation Heatsink Review

Noctua NH-L9x65 Low Profile Heatsink Review

Scythe Fuma SCFM-1000 Heatsink
...More Articles >>


Websites you may also like:
PCSTATS


FrostyTech.com
Since June 1999


Find a Heatsink
Latest Heatsink Reviews
Top 5 Heatsinks Tested
Top 5 Low Profile Heatsinks
Top 5 Liquid Coolers
Heatsinks by Mfgr / Brand


Social Media
Facebook
Twitter
Pinterest


FrostyTech.com Info
Feedback
Contact Us / Heatsink Submissions
Submit News
Privacy Policy
Suite 66

© Copyright 1999-2023 www.frostytech.com All Rights Reserved. Privacy policy and Terms of Use
Images © FrostyTech.com and may not be reproduced without express written permission. Current students and faculty of accredited Universities may use Frostytech images in research papers and thesis, provided each image is attributed.