FrostyTech.com Heatsink Reviews and Analysis
   
  

TOP 5 Heat Sinks     TOP 5 Low Profile Heat Sinks     TOP 5 Liquid Coolers    
 Heatsinks by Brand / Mfgr      Reviews + Articless     Advanced Search    

Globalwin CAK4-88T Copper Heatsink Review
Globalwin CAK4-88T Copper Heatsink Review
  0%   
Abstract: Since the copper skive portion of the Globalwin CAK4-88T is just 70mm in size, Globalwin have added an 80mm-70mm fan adaptor.

 Manufacturer  Category  Published  Author 
Globalwin   Cooling / Heatsinks   Jun 29, 2003   Max Page  

Home > Reviews > Page: Close up look at the heatsink

Globalwin CAK4-88T From All Angles

The Fan: The seven-bladed fan measures 70mm across and is held in place by four screws to the fan adaptor, and protected by a wire fan grill. The fan adaptor is held in place with its own set of screws. The fan connects via a standard three-pin fan header to the motherboard.

Top: The fan adaptor sits on top of the 60mm x 60mm skived copper heatsink. The heatsink uses one clip on the retention mechanism to hold it in place, in spite of the overall weight of the unit. The clip sits in a 6mm space between the copper fins. The white wires in the right hand side lead to the thermistor which monitors the temperature of the heatsink for motor-RPM control.

Side A: The heatsinks' copper fins are protected by an aluminum shroud with the Globalwin logo stamped on it. The clip requires the use of a flat head screw driver to engage and in general is pretty simplistic. There are no notches to prevent the clip from sliding around on the heatsink which was a little disappointing to see.
Side B:
The skived copper fins are 0.3mm thick and spaced 1mm apart. Fins are 35mm in height. The two holes on the side of the 6mm thick base are for an attachment to make this heatsink P4 compatible... but I don't know if we'd be comfortable using it as such.

Heatsink Base:

The 6mm thick copper base is machined flat, and displays a fairly nice finish both in terms of smoothness, and flatness. The base is undercut 2mm for socket cam arm clearance. Because of the size of the heatsink, one side is notched out a few millimeters for the socket clip to clear.

 Previous Page ° ° Next Page 

Table of Contents:

 1:  Globalwin CAK4-88T Copper Heatsink Review
 2: — Close up look at the heatsink
 3:  Heatsink Test Parameters
 4:  Acoustic Test Results
 5:  Synthetic Temperature Test Results

List all Globalwin heat sinks that Frostytech tested?

Facebook RSS Feed Twitter
Resources
° Got Feedback?
° Mk.II Test Platform
° Where To Buy?
° Manufacturer Index
° Industry Dir.
° Cooling Projects
Recently Tested

Scythe Mugen 5 Rev B SCMG-5100 Heatsink Review

Gelid Tranquillo 4 Air Cooled Heatsink Review

Coolermaster Ergostand III Laptop Cooling Stand Review

Noctua NH-D9DXi4-3U LGA2011 Xeon Server/Workstation Heatsink Review

Noctua NH-L9x65 Low Profile Heatsink Review

Scythe Fuma SCFM-1000 Heatsink
...More Articles >>


Websites you may also like:
PCSTATS


FrostyTech.com
Since June 1999


Find a Heatsink
Latest Heatsink Reviews
Top 5 Heatsinks Tested
Top 5 Low Profile Heatsinks
Top 5 Liquid Coolers
Heatsinks by Mfgr / Brand


Social Media
Facebook
Twitter
Pinterest


FrostyTech.com Info
Feedback
Contact Us / Heatsink Submissions
Submit News
Privacy Policy
Suite 66

© Copyright 1999-2023 www.frostytech.com All Rights Reserved. Privacy policy and Terms of Use
Images © FrostyTech.com and may not be reproduced without express written permission. Current students and faculty of accredited Universities may use Frostytech images in research papers and thesis, provided each image is attributed.