FrostyTech.com Heatsink Reviews and Analysis
   
  

TOP 5 Heat Sinks     TOP 5 Low Profile Heat Sinks     TOP 5 Liquid Coolers    
 Heatsinks by Brand / Mfgr      Reviews + Articless     Advanced Search    

Coolink H1T Heatsink Review
Coolink H1T Heatsink Review
  78%   
Abstract: What makes the Coolink H1T standout from the crowd is first of all its copper base plate.

 Manufacturer  Category  Published  Author 
Coolink   Cooling / Heatsinks   Sep 30, 2002   Max Page  

Home > Reviews > Page: Close up look at the heatsink

Coolink H1T From All Angles

The Fan: The eleven-bladed fan measures 60mm across and is held in place by a small spring clip. The fans draw power from a standard three-pin connector which hooks up to the motherboard. Since the body of the heatsink is rigid, there is no way to add a larger 70mm fan easily, and you will need to have a Y-splitter or two free power headers free to plug the fans in.

Top: The classic "H" design of this heatsink doubles the surface area in direct impact with the airflow in a minimum of space. Each of the two fans are held in place with two small spring clips. The central portion of the heatsink measures 6mm thick. The fins are roughly 23mm long, 1mm thick and spaced 2mm apart.

Side A: The copper base of the heatsink is 4mm thick and dip brazed to all of the bottom side fin edges. The three large cross cuts are only superficial, and are just there to allow the clip to lock into place. The main clip is locked into place within the heatsink and the holes cut for it also serve as exhaust vents.
Side B:
The three-prong clip is pretty easy to work with if you have a screwdriver, and the three prongs mean that if you have a board where the center socket clip has been snapped off you still have a heatsink you can use. There is room for extra fins on this side of the heatsink, but for some reason the manufacturer has decided to leave this area completely empty of cooling fins.

Heatsink Base:

The 4mm thick copper base has two really large indents from a stamping procedure which is used to ensure proper alignment on the fin assembly. The copper base is dip brazed to the nickel plated aluminum and so the thermal joint should be pretty consistent all the way across. The base is just about perfectly flat in one axis, and slightly curved in the direction that the sanding went. The base itself measures 48mm x 57mm.

 Previous Page ° ° Next Page 

Table of Contents:

 1:  Coolink H1T Heatsink Review
 2: — Close up look at the heatsink
 3:  New Heatsink Test Parameters
 4:  Acoustic Test Results
 5:  Synthetic Temperature Test Results

List all Coolink heat sinks that Frostytech tested?

Facebook RSS Feed Twitter
Resources
° Got Feedback?
° Mk.II Test Platform
° Where To Buy?
° Manufacturer Index
° Industry Dir.
° Cooling Projects
Recently Tested

Scythe Mugen 5 Rev B SCMG-5100 Heatsink Review

Gelid Tranquillo 4 Air Cooled Heatsink Review

Coolermaster Ergostand III Laptop Cooling Stand Review

Noctua NH-D9DXi4-3U LGA2011 Xeon Server/Workstation Heatsink Review

Noctua NH-L9x65 Low Profile Heatsink Review

Scythe Fuma SCFM-1000 Heatsink
...More Articles >>


Websites you may also like:
PCSTATS


FrostyTech.com
Since June 1999


Find a Heatsink
Latest Heatsink Reviews
Top 5 Heatsinks Tested
Top 5 Low Profile Heatsinks
Top 5 Liquid Coolers
Heatsinks by Mfgr / Brand


Social Media
Facebook
Twitter
Pinterest


FrostyTech.com Info
Feedback
Contact Us / Heatsink Submissions
Submit News
Privacy Policy
Suite 66

© Copyright 1999-2023 www.frostytech.com All Rights Reserved. Privacy policy and Terms of Use
Images © FrostyTech.com and may not be reproduced without express written permission. Current students and faculty of accredited Universities may use Frostytech images in research papers and thesis, provided each image is attributed.